Endurance Archives - ÃÛÌÒÊÓÆµ The World's Leading High Performance Brake Specialists Tue, 14 Jul 2026 15:17:42 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 /wp-content/uploads/2021/04/cropped-favicon-32x32.jpg Endurance Archives - ÃÛÌÒÊÓÆµ 32 32 Another Podium for SR-21â„¢-Equipped Gridlife Racer at Gingerman Raceway /race-motorsport-articles-cars/another-podium-for-sr-21-equipped-gridlife-racer-at-gingerman-raceway/ Tue, 14 Jul 2026 15:17:42 +0000 /?p=42559 The post Another Podium for SR-21â„¢-Equipped Gridlife Racer at Gingerman Raceway appeared first on ÃÛÌÒÊÓÆµ.

]]>

Kal Fortner is using ÃÛÌÒÊÓÆµ Racing’s sintered brake pads on his Mercedes track car

Kal Fortner is competing in the 2026 season of Gridlife in the USA, using his Mercedes AMG GTS as weapon of choice.

The driver is utilising ÃÛÌÒÊÓÆµ Racing’s SR-21â„¢ sintered endurance motorsport brake pads to ensure stopping power is optimal in his super-coupe.

Following podiums in Carolina and Atlanta, alongside another SR-21™-equipped driver, Eric ‘Dewey’ DeWitt, Fortner next visited Michigan’s Gingerman Raceway for Gridlife Midwest, with more top results secured across the weekend.

Read how it panned out in his own words below…

“Coming off of another strong showing at Gridlife Atlanta with a double podium in Streetmod for ÃÛÌÒÊÓÆµ, I was feeling all the momentum and all the confidence heading into my 10th Gridlife Midwest, the event that started it all for me! The energy at Gridlife Midwest is just unmatched in every way, from the massive crowds to the festival vibes throughout the weekend, it’s always been my favourite event making a podium here just that much more meaningful. This is Gridlife’s Indy 500.”

“This weekend proved to me more of a challenge that I could have ever expected though. Right at the first corner of the very first session, my ABS failed, making each braking zone incredibly challenging. While racing a car designed without ABS is relatively straightforward, racing one without it that’s designed to have it is nothing short of dangerous.”

“Because of this, I was far off of the pace I needed to be fighting at the front, and potentially too far off to even put it in the top-5 for the podium sprint. I knew that if I wanted a podium, I needed to give it my absolute everything to at the very least make it into the sprint in order to give us the chance to fix our ABS issues, and I was able to do just that! Modulating my SR-21™ pads and focusing on perfecting each and every braking zone, I got us into the sprint by just over a second! This gave us a full day to chase whatever electrical issue was causing our problems. Thankfully, Gridlife is a paddock full of the most helpful people, and after getting help from a couple mechanics on a Rush SR team, we found the blown fuse, and the ABS was back to working as it should! 

“Come Sunday, I knew what I had to do, and now that I could actually lean into the full potential of my ÃÛÌÒÊÓÆµ brakes, I knew I could give it my everything to go for my third podium in a row for the season! Although I missed out on second place due to fuel cuts from the car getting little too hot waiting in the pits from an incident on track, I was able to secure third, and with Eric Dewitt in first, this was yet another double podium for ÃÛÌÒÊÓÆµ! After such a challenging event, to be able to come home with a podium is something I’ll forever be grateful for. Next up we’ve got Watkins Glen, one of my favourite tracks and a place that the Mercedes really shines at! The last time we were there, not only did I set the Streetmod record, I was also able to get the overall record! I’m so hyped to see what we can do this time!â€

Connect with Kal Fortner for more news and information:

SR-21â„¢ Race and Endurance Pads

A variation of SR-11â„¢ that offers ultra-high friction and is targeted for the front and rear of race cars with bias controls only. SR bites harder and lasts longer.

The post Another Podium for SR-21â„¢-Equipped Gridlife Racer at Gingerman Raceway appeared first on ÃÛÌÒÊÓÆµ.

]]>
Thrills and Spills at Portimão for SR-21â„¢-Equipped BMW Race Team /race-motorsport-articles-cars/thrills-and-spills-at-portimao-for-sr-21-equipped-bmw-race-team/ Tue, 16 Jun 2026 14:31:17 +0000 /?p=42371 The post Thrills and Spills at Portimão for SR-21â„¢-Equipped BMW Race Team appeared first on ÃÛÌÒÊÓÆµ.

]]>

Autoworks Motorsport is competing in the Iberian Supercars Endurance Series

The ÃÛÌÒÊÓÆµ Frenos (Spain)-supported Autoworks Motorsport race team has achieved much success in recent years, piloting ÃÛÌÒÊÓÆµ-equipped race cars in the Iberian Supercars Endurance Series.

Since the second half of 2025, the outfit has been elevated to the GT4 Bronze class thanks to the acquisition of a G82 BMW M4 GT4 – complete in the long-standing ÃÛÌÒÊÓÆµ Racing livery.

This car has been sporting ÃÛÌÒÊÓÆµ Racing’s SR-21â„¢ sintered endurance race pads, giving the team the edge when it comes to stopping power.

We most recently caught up with Autoworks Motorsport off the back of their debutant race for 2026 at the famous Portimão Circuit, where great promise was shown across the weekend despite many setbacks.

Read how it all panned out in their own words below…

“Autoworks Motorsport closes the first round of the Iberian Supercars at the Algarve International Circuit with a bittersweet taste. The weekend demonstrated the excellent technical level of the Madrid structure and the incredibly fast race pace of its driver duo, but the final results were overshadowed by the harshness on track.

“The weekend began with very positive feelings in the qualifying sessions, where the tremendous equality and great form of the drivers from the Madrid structure were evident.”

“Héctor Hernández and Borja Hormigos drove to the limit, stopping the clock with a minimal difference of just one tenth of a second in favour of Héctor. This consistency in times demonstrated the rapid adaptation of both to the latest evolution of the BMW M4 GT4 (G82) and gave the team excellent starting positions for the official races. In the first race of the weekend, the team started from fourth position in the GT4 Bronze category, while in the second race they managed to secure a stellar second position.

“However, luck did not accompany them in both races when they were running in podium positions. In the first race, a heavy hit delivered by the same rival relegated the team to fifth final position, a result that did not do justice to the real pace on track. The story repeated itself almost identically in the second leg. A new impact by the same opponent left the vehicle severely damaged, forcing a retirement and depriving the car of crossing the finish line.”

“Despite the double material blow, the balance of the structure is positive professionally. The pure performance of the car, the race pace, and the flawless work of the young technical specialists and technological partners (ÃÛÌÒÊÓÆµ racing and ELF Lubricants) proved that the project has plenty of speed to fight for the GT4 Bronze championship.”

“Qualifying showed that Borja and I are running the same times and that the car is fast,” says Héctor Hernández. “The race pace was spectacular and that is the positive takeaway. We know we have the speed and that the team worked at two hundred percent, but it is a shame that external factors leave us without the points we deserved.”

“It makes us very angry to finish like this because starting second in race two, the podium was within our reach,” declares Borja Hormigos. “In the second leg, the hit forced us to retire. Now it is time to change the mindset immediately; we had to experience the bitter side of racing and now we have to pull together to leave the car perfect.”

“The logistics team is already on its way back to the Autoworks Motorsport facilities. The technical staff will focus all their efforts starting today on evaluating the structural damage and proceeding with the urgent repair of the BMW M4 GT4, with the aim of arriving in full condition for the most important event of the year in front of their fans.

“The second round of the Supercars Endurance season will be held at the Circuito de Madrid Jarama-RACE. The event will score points solely for the Spanish Supercars Championship and promises to bring together a high-level grid once again on a circuit with a unique history in Iberian motorsport.”

Connect with Autoworks Motorsport for more news and information:

SRâ„¢ Sintered Endurance Race Pads

A world-first true endurance pad, delivering better braking and lasting longer than just about any of its rivals. Available in SR-11â„¢ and SR-21â„¢ blends.

View Product

The post Thrills and Spills at Portimão for SR-21â„¢-Equipped BMW Race Team appeared first on ÃÛÌÒÊÓÆµ.

]]>
SR-21â„¢-Equipped Racers Secure More Podiums in Atlanta /race-motorsport-articles-cars/sr-21-equipped-racers-secure-more-podiums-in-atlanta/ Mon, 01 Jun 2026 09:00:13 +0000 /?p=42319 The post SR-21â„¢-Equipped Racers Secure More Podiums in Atlanta appeared first on ÃÛÌÒÊÓÆµ.

]]>

Kal Fortner is using ÃÛÌÒÊÓÆµ Racing’s sintered brake pads on his Mercedes track car

Kal Fortner is competing in the 2026 season of Gridlife in the USA, using his Mercedes AMG GTS as weapon of choice.

The driver is utilising ÃÛÌÒÊÓÆµ Racing’s SR-21â„¢ sintered endurance motorsport brake pads to ensure stopping power is optimal in his super-coupe.

Following a podium finish at Grid Life Carolina, where he finished only behind another SR-21â„¢ for an ÃÛÌÒÊÓÆµ front-row lockout, Fortner came back fighting at the next round held at Atlanta’s iconic Michelin Road Raceway, where more podiums were clinched by both drivers.

Read how it panned out in his own words below…

“Going into this weekend, fresh off of a strong result at Gridlife Carolina coming in P2, I had so much confidence to give it my everything one of my all-time favourite tracks: Road Atlanta. To start out the weekend, I was met with some traffic during my flyers, so initially I wasn’t able to show what the true pace was. With this being a two-day, traditional time attack weekend with a limited schedule, the pressure was on to put together a perfect lap. On top of that, we had rain in the forecast for Sunday, potentially limiting us to only 3 dry sessions.”

“Road Atlanta is a very high-speed track, with the car hitting speeds of over 165 mph, putting the braking performance on centre stage. My SR-21â„¢s performed at their best, giving me the confidence to carry as much speed as possible into even the heaviest of braking zones, without a single ounce of hesitation, just full confidence. Ending the day on Saturday, I still never got a truly clean lap catching traffic on a track that is incredibly difficult to pass at, but even with this, I was able to put us into P3 going into Sunday.”

“Come Sunday morning, to my surprise, we had no rain! I knew exactly where I needed to find the time, and I did just that. Battling back and forth up until the last session, I ended the weekend in P2, with Eric Dewitt in P1, also on ÃÛÌÒÊÓÆµs! Just like Carolina, this was an ÃÛÌÒÊÓÆµ Streetmod 1-2, and on top of that, in ClubTR, the entire podium was swept by ÃÛÌÒÊÓÆµ equipped cars! I couldn’t be prouder to show represent ÃÛÌÒÊÓÆµ in such a strong showing against such a strong field at one of the most difficult tracks in the world.â€

Connect with Kal Fortner for more news and information:

SR-21â„¢ Race and Endurance Pads

A variation of SR-11â„¢ that offers ultra-high friction and is targeted for the front and rear of race cars with bias controls only. SR bites harder and lasts longer.

The post SR-21â„¢-Equipped Racers Secure More Podiums in Atlanta appeared first on ÃÛÌÒÊÓÆµ.

]]>
SR-21â„¢ Front-Row Lock-Out at Gridlife Carolina /race-motorsport-articles-cars/sr-21-front-row-lock-out-at-gridlife-carolina/ Thu, 21 May 2026 13:57:56 +0000 /?p=42255 The post SR-21â„¢ Front-Row Lock-Out at Gridlife Carolina appeared first on ÃÛÌÒÊÓÆµ.

]]>

Kal Fortner is using ÃÛÌÒÊÓÆµ Racing’s sintered brake pads on his Mercedes track car

Kal Fortner is competing in the 2026 season of Grid Life in the USA, using his Mercedes AMG GTS as weapon of choice.

The driver is utilising ÃÛÌÒÊÓÆµ Racing’s SR-21â„¢ sintered endurance motorsport brake pads to ensure stopping power is optimal in his super-coupe.

We caught up with Fortner following the Gridlife Carolina round, where he secured P2 in class, just behind another SR-21™-equipped driver, Eric ‘Dewey’ DeWitt.

Read how it panned out in his own words below…

“We ended up scoring P2 at Gridlife Carolina, and Dewey got P1 so we’re looking at an ÃÛÌÒÊÓÆµ front-row lockout!

“The first day, we battled the heat since temps were in the 90s, but on Sunday after putting in some sticker tires I was able to go 5 tenths faster than my previous personal best!”

“The SR-21™s felt incredible all weekend and I really had the confidence to push into the braking zones and trust the ABS when needed.

“Next up is Atlanta and I really think we’ve got a good shot at getting P1 there, it’s a track that really suits the Mercedes and personally a track that I’m very comfortable at.â€

Connect with Kal Fortner for more news and information:

SR-21â„¢ Race and Endurance Pads

A variation of SR-11â„¢ that offers ultra-high friction and is targeted for the front and rear of race cars with bias controls only. SR bites harder and lasts longer.

The post SR-21â„¢ Front-Row Lock-Out at Gridlife Carolina appeared first on ÃÛÌÒÊÓÆµ.

]]>
GT Cup: Donington Park Round 1 Race Report /race-motorsport-articles-cars/gt-cup-donington-park-round-1-race-report/ Wed, 15 Apr 2026 12:57:30 +0000 /?p=42005 The post GT Cup: Donington Park Round 1 Race Report appeared first on ÃÛÌÒÊÓÆµ.

]]>

ÃÛÌÒÊÓÆµ is an official partner of the GT Cup for the 2026 season

ÃÛÌÒÊÓÆµ Racing – the high-performance arm of ÃÛÌÒÊÓÆµ – is an official partner of the GT Cup Championship for its 2026 season.

All cars on the GT Cup grid are sporting the ÃÛÌÒÊÓÆµ Racing logo on their door number boards, as well as appearing in other championship branding and literature.

Following the pre-season media day at Donington Park in March, the roadshow returned to the prestigious Derbyshire-based venue for Round 1 of the championship, where a gruelling 100-minute race under challenging conditions made for some exciting racing.

Read the full report below from the series…

“A day of mixed weather was no challenge for PB Racing with JMH’s Peter Erceg and Marcus Clutton, as they prevailed in a thrilling 100-minute battle at Donington Park over GT3 debutants Team BRIT.

“Qualifying on pole, it looked as though BRIT’s Jamie Falvey and Peter Fullick had put themselves in prime position for a brace of victories in their BMW M4 GT3. But pre-race rain threw a spanner in the works and changing strategies opened the door for experienced hands Erceg and Clutton to power ahead to Group GT3 and Overall glory. 

“GTC was a thriller from the start, and it was JMH who walked away from the East Midlands with two wins for the team as Frank Morris and James Pickford powered to the Group win. SVG Motorsport took a double as Marc Elman and Cameron Pratt-Thompson snatched GTH, whilst a gamble to go on slicks before the competition gave Neil Wallace and Ian Astley the foundation to take GTA honours. Paul Bailey and David Brabham did a GTO double in their new Mercedes-AMG whip with SB Rce Engineering.â€

Qualifying

“Compared to Saturday’s greasy conditions, Sunday’s sunshine-soaked qualifying session was an opportunity for drivers to bolt on a set of Pirelli slick tyres and go flat out for 15 minutes. 

“The first session resulted in a comprehensive GTH/GTA double for SVG Motorsport – but only just. In GTH, it appeared as though 24-7 Motorsport’s Charlie Benson had got the Group pole in his Ginetta G56 but Cameron Pratt-Thompson – in his own G56 – was on a charge, and reducing the deficit lap-on-lap. As the chequered flag came out, Pratt-Thompson reached his zenith – snatching pole by 0.031sec with a 1m33.509s effort. 

“In GTA, Ian Astley got behind the wheel of the #24 BMW M4 and put his foot down. His first lap put him to the top of the group and he improved from there, finally settling on a 1m35.266sec to put himself ahead of the Raceworks Motorsport Ginetta of Daniel Quintero on the grid. 

“Come the second session, there was no change in the intensity with GT3 and GTC machines mixing it at the top for the overall pole. The GT3s of Falvey and Erceg took turns swapping the top spot with the GTC Lamborghini Super Trofeo of Mike Taylor, every time logged resulting in a different car in the hot seat. 

“But Round One winner Falvey continued his hot streak in the BMW M4 GT3 to take GT3 and Overall pole with a 1m26.950sec, two-tenths ahead of Taylor’s Triple M Motorsport Lamborghini which took GTC honours. Erceg took third, and a strong spot on the second row for the afternoon’s 100-minute encounter. 

“Bailey rounded out the pole-sitters, as he continues to get to grips with his eye-catching Mercedes-AMG GT in Group GTO.â€

GT Cup 100

“The first 100-minute extravaganza of the season proved thrilling in more ways than one, as lunch-time rain drenched the circuit and meant wet tyres were the name of the game. On the start, Falvey converted pole into an early lead, fending off pressure initially from Taylor – who made a lightning start in the Super Trofeo – and then Erceg, who quickly made the most of the changeable conditions in his Audi R8 LMS.

“Also making quick work of gaining places was Triple M Motorsport’s Rob Garofall who moved up from third to the lead of GTH as the race went green after starting under the safety car. With Erceg looking to pounce on any opportunities, Taylor couldn’t take too many risks or he’d risk losing his second overall. 

“As the leaders started to pass traffic, the benefits of an increasingly dry line were negated by having to be careful getting themselves past. Come the stops, teams opted to play it safe except for SVG Motorsport, as Ian Astley elected to give it a go and as Neil Wallace brought the GTA BMW M4 GT4 in from second, wets were swapped for slicks and Astley went out to hunt down erstwhile leaders Raceworks Motorsport.

“For others, the choice to stick with what they had looked like it might go against them as the additional forecasted rain failed to materialise. Thankfully for them, a late safety car to recover a stranded car gave them the perfect opportunity to take a free stop and change onto the dry rubber. 

“Taking over from Erceg, Marcus Clutton initially set blistering pace on increasingly overheating wets to overhaul the Team Brit crew, and once the safety car came back in he sprinted to the flag to take a first Group and Overall win of the season for the PB Racing with JMH team.”

“GTC proved thrilling to the end, as positions kept changing throughout. Making the most of trials and tribulations for their competition, JMH scored a double Group victory as Frank Morris and James Pickford bested fellow Lamborghini duo Taylor and Charlie Digby. Jack Gadd and Dan Brown kept up their strong start to the season for DWG Motorsport with Topcats as they completed an all-Super Trofeo podium. 

“Sticking to the plan benefitted SVG Motorsport as the team picked up a pair of wins in both GTH and GTA. The former proved captivating throughout, with Marc Elman and Cameron Pratt-Thompson ending in the hot seat as the music stopped. The Ginetta racers finished ahead of Jolt Racing, John Ingram and Rupert Williams picking up another podium finish on their return to GT Cup. 24-7 Motorsport’s Ben Taylor and Charlie Benson rounded out the GTH top three.

“In GTA, Astley’s call to go onto slick at the mandatory pitstop proved race-winning. Getting up to speed quickly, they pipped Raceworks’ Andrew Perry and Daniel Quintero to take the win. GTO honours went the way of Paul Bailey and David Brabham – the latter extracting every ounce of speed possible out of their Mercedes-AMG GT to finish fourth overall.â€

After a thrilling weekend of endurance racing to start the year, the GT Cup Championship brings Sprint racing back into the mix for the next round of the year at Snetterton on 16/17 May.

– To find out more about the GT Cup, ±è±ô±ð²¹²õ±ðÌý.

– Discover the acclaimed ÃÛÌÒÊÓÆµ Racing range by clicking here.

ÃÛÌÒÊÓÆµ Racing Range

High-performance braking upgrades designed for everything from track days to endurance racing. Trusted by countless teams across the globe.

View Product

The post GT Cup: Donington Park Round 1 Race Report appeared first on ÃÛÌÒÊÓÆµ.

]]>
Suit Your Style: ÃÛÌÒÊÓÆµ Brake Upgrades for Fully-Fledged Track and Race Machines /corporate-news/suit-your-style-ebc-brake-upgrades-for-fully-fledged-track-and-race-machines/ Wed, 11 Mar 2026 16:29:22 +0000 /?p=41873 The post Suit Your Style: ÃÛÌÒÊÓÆµ Brake Upgrades for Fully-Fledged Track and Race Machines appeared first on ÃÛÌÒÊÓÆµ.

]]>

We show you the ÃÛÌÒÊÓÆµ components that perfectly match your lifestyle

Welcome to ÃÛÌÒÊÓÆµâ€™s ‘Suit Your Style’ blog series, where we match you up with the ÃÛÌÒÊÓÆµ upgrades that complement particular driving requirements, ensuring you get the ideal components for your vehicle.

In today’s blog, we’re hitting the circuit to look at braking components for dedicated track/race cars – the most demanding form of driving where it’s more vital than ever to rely on strong and enduring stopping power.

Around a decade ago, ÃÛÌÒÊÓÆµ launched its high performance/motorsport sub-division, ÃÛÌÒÊÓÆµ Racing – a firm that has become synonymous with range-topping braking at race tracks around the globe.

From road-legal track upgrades to endurance race components, there’s something for every corner of the motorsport spectrum in the ÃÛÌÒÊÓÆµ Racing range, as we will explore below…

Bluestuff

A great all-round sport and race pad – just as comfortable on track as it is performing daily driving duties. Road legal in most territories, making it incredibly versatile.

Bluestuff material exhibits a 0.52μ stable friction once bedded, stable up to a slightly higher 550℃/1000℃ than its sister compound Yellowstuff but with the benefit of a 30% longer lifespan.

Bluestuff has been a track day favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe. New formula is copper free to conform to upcoming environmental legislations.

RP-1â„¢/RP-Xâ„¢ Motorsport Brake Pads

Designed for vehicles driven hard on track, RP-1™ possesses a moderately high friction level of 0.45 between 100 – 750°C (200 – 1400°F). The more progressive response characteristic of RP-1™ makes it well suited for inherently ‘over-servoed’ vehicles where a softer pad material is desirable to allow greater finesse when on the brakes.

RP-X™ possesses a high friction level of 0.55 between 0 – 750°C (Ambient – 1400°F) and achieves a 100% brake effect from cold – an excellent choice for sprint racing or hill climb events, where full brake performance is essential without requiring any ‘warming up’, but also makes RP-X™ well suited to any type of circuit use where a high initial bite and powerful brake response is desirable.

Both RP-series brake pad options are a fantastic choice for track day regulars or out-and-out racers.

Please note: ÃÛÌÒÊÓÆµâ€™s RP-series of brake pads are not designed for the road, but may be used in street conditions where local laws permit.

SR-11â„¢/ SR-21â„¢ Sintered Endurance Brake Pads

Whilst the competition struggles to make organic and semi-metallic pads last longer and longer to reach the pinnacle of brake pad durability, ÃÛÌÒÊÓÆµ has taken a fresh new approach with a blend of compressed and heat fused (sintered) metal powdered alloys, to deliver a brake pad that brakes better and lasts longer than just about everything.

The new SR series comes in two blends, SR-11â„¢ the medium friction version and SR-21â„¢ the higher friction options

Although badged an endurance-grade material, these pads are equally at home in any form of closed-circuit racing, short or long duration.

Please note: ÃÛÌÒÊÓÆµâ€™s SR-series of brake pads are not designed for the road, but may be used in street conditions where local laws permit.

Fully Floating Two-Piece Brake Rotors

Craftsmanship meets fine materials in ÃÛÌÒÊÓÆµâ€™s highest performing rotor to date. Not simply a ‘bolt-up’ two-piece unit like many of ÃÛÌÒÊÓÆµâ€™s competitors offer, they are genuine fully floating units with flat-sided SD square drive buttons, allowing expansion and contraction under the harsh conditions of heavy braking.

Featuring a a black, heat-resistant finish that quickly wears down to the natural iron finish on the disc ring within the first few miles. Any unswept areas remain protected by the black coating, such as the outer edges and inside the pad track, unless burned off due to hard use and high temperatures.

Another major benefit of the ÃÛÌÒÊÓÆµ fine slotted discs is their ability to totally resist cracking common with ‘through-drilled’ discs.

Apollo-Series Brake Calipers

UK designed and made strong-yet-lightweight aluminium four- and six-piston brake calipers, which can be purchased within a Big Brake Kit or as separate components for vehicle builders to convert cars where a dedicated Big Brake Kit is not yet made by ÃÛÌÒÊÓÆµ.

Packed with cutting-edge tech such as high-temperature fluid seals coupled with full boot type dust seals, lightweight hard-anodised aluminium pistons, staggered piston sizes and fully stainless-steel fittings.

BF307+ Super DOT 4 Brake Fluid

ÃÛÌÒÊÓÆµâ€™s BF307+ high performance Super DOT 4 brake fluid has been specially formulated to provide outstanding performance for braking systems routinely operated at extreme temperatures, making this fluid ideal for fast street use, track days and racing.

Bedding In

Bedding-in is an important part in getting the most out of your new braking components, especially out on track. Check out our handy road and track bedding-in guide by clicking here.

Availability

Available now. Please  to find your local ÃÛÌÒÊÓÆµ stockist and see a full list of applications.

 

The post Suit Your Style: ÃÛÌÒÊÓÆµ Brake Upgrades for Fully-Fledged Track and Race Machines appeared first on ÃÛÌÒÊÓÆµ.

]]>
ÃÛÌÒÊÓÆµ Racing Becomes Official Partner of GT Cup for 2026 Season /race-motorsport-articles-cars/ebc-brakes-racing-becomes-official-partner-of-gt-cup-for-2026-season/ Wed, 25 Feb 2026 16:35:11 +0000 /?p=41829 The post ÃÛÌÒÊÓÆµ Racing Becomes Official Partner of GT Cup for 2026 Season appeared first on ÃÛÌÒÊÓÆµ.

]]>

The motorsport braking firm will support the fiercely fought British championship

ÃÛÌÒÊÓÆµ Racing – the high-performance arm of ÃÛÌÒÊÓÆµ – has been confirmed as an official partner of the GT Cup Championship for its 2026 season.

All cars on the GT Cup grid will sport the ÃÛÌÒÊÓÆµ Racing logo on their door number boards, as well as appearing in other championship branding and literature.

ÃÛÌÒÊÓÆµ Racing has a well-established relationship with the GT Cup, with many teams on the grid already sporting the firm’s motorsport braking components and a successful sponsorship between the two parties previously carried out across the 2020 season.

Founded in 2007 by Marc Haynes, the GT Cup Championship has grown into one of the UK’s leading platforms for competitive GT racing. Built on the ethos of being ‘by racers, for racers,’ it combines professional standards with a welcoming, friendly paddock that prioritises enjoyment, sportsmanship and accessibility.

With a unique combination of shorter sprints and longer endurance races at each round, the series perfectly encapsulates the recently launched line of ÃÛÌÒÊÓÆµ Racing motorsport components that have received rave reviews from race tracks around the globe.

Stefan Goddard, Race Technical Manager at ÃÛÌÒÊÓÆµ, commented: “We are pleased to be supporting GT Cup this season and are looking forward to further showcasing our established motorsport range.

“With existing partnerships already in place across the grid, we look forward to supporting additional teams and drivers with our experience and expertise. This partnership aligns perfectly with our ethos, and we are excited for the season ahead.â€

Hannah James, Championship Director, added: “I’m delighted to welcome ÃÛÌÒÊÓÆµ as an official partner for the new GT Cup season. Ourselves and our competitors have a good working relationship with the company as an industry leader, so this is a deal that will only benefit all parties for what we can see is shaping up to be a very exciting season already.”

– The 2026 GT Cup Championship kicks off at Derbyshire’s Donington Park on 11-12 April. To find out more, please .

– Discover the acclaimed ÃÛÌÒÊÓÆµ Racing range by clicking here.

ÃÛÌÒÊÓÆµ Racing Range

High-performance braking upgrades designed for everything from track days to endurance racing. Trusted by countless teams across the globe.

View Product

The post ÃÛÌÒÊÓÆµ Racing Becomes Official Partner of GT Cup for 2026 Season appeared first on ÃÛÌÒÊÓÆµ.

]]>
ChampCar Team Wins National Championship with ÃÛÌÒÊÓÆµ SR-21â„¢ Pads /race-motorsport-articles-cars/champcar-team-wins-national-championship-with-ebc-sr-21-pads/ Tue, 03 Feb 2026 11:29:21 +0000 /?p=41705 The post ChampCar Team Wins National Championship with ÃÛÌÒÊÓÆµ SR-21â„¢ Pads appeared first on ÃÛÌÒÊÓÆµ.

]]>

Dan Tiley and David Pesce run the endurance friction material in their Corvette

Vehicle dynamics engineers, Dan Tiley and David Pesce, currently race their 1991 Chevrolet Corvette under the ‘Eddie Vetter’ team in the US-based ChampCar endurance racing series.

This attainable-yet-demanding series sees 7+ hour races being held across North America each year – putting intense pressure on teams and cars.

With their previous go-to brake pad option being discontinued recently, Tiley and Pesce decided to test out ÃÛÌÒÊÓÆµ Racing’s SR-21â„¢ endurance brake pad at the final championship race of the season.

Despite limited testing time over the weekend, the team were delighted with the performance and longevity on offer, eventually winning the overall race and clinching the 2025 National Championship trophy.

You can hear how it all panned out in Tiley’s own words below…

“Our car is a 1991 Chevrolet Corvette, running under the team name ‘Eddie Vetter’. This car is the successor to our previous car, ‘Freddie Mercury’; a 1986 Mercury Capri. This car is raced by myself, Dan Tiley, and teammate David Pesce. David and I are both race car vehicle dynamics simulation engineers, primarily supporting our NASCAR efforts. David works for GM in their racing division, and, ironically, I work for Ford Racing.”

“Eddie Vetter is big, heavy and bleeds American muscle, so it needs all the help it can get in the braking department. We’ve a rival brake pad for years but can no longer get them. After watching Roy Dietsch’s videos highlighting SR-21â„¢ and SR-11â„¢s, we revamped our system solely for the purpose of using those pads. We had to change our calipers in order to accommodate them. The end result was a huge gain for us! We now get excellent modulation (better than the previous pads we used), the pads are easy on the rotors and we had very little pad wear after 12 hours of racing! We are not a professional racing team with a full pit crew, and simply aren’t able to change brake pads mid-race without losing significant time on track.”

“The first seven years of my career with Ford I was a Vehicle Dynamics Engineer working on future products like the Mustang and Lincoln LS. Brake development and brake feel ‘DNA’ was a key part of my job as part of that group, so I like to think that I have some reasonable background in the area of automotive brake feel and performance.

“Our first race with ÃÛÌÒÊÓÆµ pads was the Championship race recently. We knew it was a risk going to the Nationals with an untested brake system, AND test day was cancelled due to weather, but it paid off in spades! We won the overall race, and ultimately the 2025 National Championship on ÃÛÌÒÊÓÆµ brake pads!”

“The previous pad manufacturer has left a huge hole in the endurance racing market with the lack of their components, which were unanimously accepted as the gold standard for performance and wear. ÃÛÌÒÊÓÆµ has set a new bar with their SR series of brake pads! 

“Thanks again for producing a great product that we’ve so dearly needed!â€

Connect with the Eddie Vetter Racing Team for more news and information:

SR-21â„¢ Race and Endurance Pads

A variation of SR-11â„¢ that offers ultra-high friction and is targeted for the front and rear of race cars with bias controls only. SR bites harder and lasts longer.

The post ChampCar Team Wins National Championship with ÃÛÌÒÊÓÆµ SR-21â„¢ Pads appeared first on ÃÛÌÒÊÓÆµ.

]]>
ÃÛÌÒÊÓÆµ-Equipped Civic Race Team Excel in Final Rounds /race-motorsport-articles-cars/ebc-equipped-civic-race-team-excel-in-final-rounds/ Thu, 22 Jan 2026 15:54:09 +0000 /?p=41671 The post ÃÛÌÒÊÓÆµ-Equipped Civic Race Team Excel in Final Rounds appeared first on ÃÛÌÒÊÓÆµ.

]]>

Semprini Racing is using ÃÛÌÒÊÓÆµ Racing’s SR-11â„¢ pads in a number of race series around the UK

Jeremy Evans and Phil Hart are the drivers of the Tunbridge Wells-based Semprini Racing outfit – a team that is currently campaigning a K24-engined EP3 Honda Civic Type R across both the MSV Trackday Trophy and BRSCC Supersport Endurance Championship race series in the UK (also performing occasional rounds in the MSVT Trackday Championship and the BRSCC Clubsport Trophy).

The duo relies on ÃÛÌÒÊÓÆµ Racing’s SR-11â„¢ pads (front axle) and ÃÛÌÒÊÓÆµâ€™ Bluestuff B pads (rear axle).

We catch up with the team as they enter their final rounds of 2025 – which proved to be a great success.

Read how it all panned out in their own words below…

“We managed to get the Civic back together after the crash and made the last two races of the year! 

“After a mid-season crash at a wet Donington Park, the Semprini Racing Civic underwent an unscheduled rebuild! 

“Joining up with the Club Racing UK team for the famous Birkett Relay, the ÃÛÌÒÊÓÆµ SR-11â„¢/Bluestuff-equipped Civic made its return to action on the Silverstone Grand Prix circuit. 

“Pressed into action for two stints rather than the planned one due to an issue with another car in the team, Jeremy quickly got himself and the car back up to speed and posted a best lap time two seconds quicker than when they had raced at the circuit earlier in the season.”

“The final race of the season was in the Trackday Trophy at Brands Hatch and was a unique experience as qualifying had to take place behind the safety car because of fog. This meant grid positions were drawn out of a cup with Jeremy drawing P30 out of the 34 cars! 

“Come race time and the fog had lifted but the rain had started. A very busy start at the Brands Hatch Indy circuit from P30 saw Jeremy stay out of trouble and then set about some overtaking… and some more overtaking!

“In tricky wet conditions, Jeremy relied on the excellent feel from the ÃÛÌÒÊÓÆµ setup and made up an incredible 25 places to finish 5th overall and 4th in class at the flag. In fact, Jeremy made up more places than any other driver!

“On to 2026 now and plans are already taking shape for another season with the Civic.”

Connect with Semprini Racing for more news and information:

SR-11â„¢ Race and Endurance Pads

A medium-friction endurance motorsport compound that’s targeted for front of street base cars where high ABS effect exists on the car or for the front and rear of race cars with bias controls.

Bluestuff NDX Street/Motorsport Pads

Reformulated for faster bedding and reduced early life fade –our recommended entry-level race pad. Medium-plus lifetime and the choice for several seasons in BMW Cup racing.

The post ÃÛÌÒÊÓÆµ-Equipped Civic Race Team Excel in Final Rounds appeared first on ÃÛÌÒÊÓÆµ.

]]>
ÃÛÌÒÊÓÆµ-Equipped Semprini Racing – Mid-Season Round-Up /race-motorsport-articles-cars/ebc-equipped-semprini-racing-mid-season-round-up/ Tue, 23 Sep 2025 13:39:34 +0000 /?p=41246 The post ÃÛÌÒÊÓÆµ-Equipped Semprini Racing – Mid-Season Round-Up appeared first on ÃÛÌÒÊÓÆµ.

]]>

The team is using ÃÛÌÒÊÓÆµ Racing’s new endurance pad in a number of race series around the UK

Jeremy Evans and Phil Hart are the drivers of the Tunbridge Wells-based Semprini Racing outfit – a team that is currently campaigning a K24-engined EP3 Honda Civic Type R across both the MSV Trackday Trophy and BRSCC Supersport Endurance Championship race series in the UK (also performing occasional rounds in the MSVT Trackday Championship and the BRSCC Clubsport Trophy).

The duo rely on ÃÛÌÒÊÓÆµ Racing’s SR-11â„¢ pads (front axle) and ÃÛÌÒÊÓÆµâ€™ Bluestuff B pads (rear axle).

We catch up with the outfit mid-way through the 2025 season, where they’ve already encountered plenty of thrills and spills along the way, as you can read in their own words below…

“A mixed first half of the season!

“Semprini Racing’s ÃÛÌÒÊÓÆµ-equipped Honda Civic has had a busy and mixed start to the season. Electrical gremlins in pre-season testing meant the first round of the BRSCC Supersport Endurance Cup was missed, with the season starting instead with the MSV Trackday Trophy at Silverstone.

“This season, the Civic is once again with the tried-and-tested combination of ÃÛÌÒÊÓÆµ SR-11â„¢ front pads and Bluestuff rear, giving that great combination of stopping power and pedal feel.

“Solid mid-class pace at Silverstone, but importantly, reliability from the first race with a new engine wiring loom gave the team a huge relief.

“Next up was the delayed return to the Supersport grid at Oulton Park, a great track and firm favourite of both Jeremy and Phil. Tricky, changeable wet/dry conditions saw the pair again solidly mid-class without taking undue risks. The feel from the SR-11™/Bluestuff combo meant braking in the changeable conditions was predictable and the drivers could concentrate on finding grip on the damp track. Despite a last lap clutch failure, the Civic was classified as a finisher and we breathed a sigh of relief, only to have the recovery truck pull the front of the car off and damage the oil cooler, meaning a bigger repair job than hoped for!

“With clutch and oil cooler replaced and the car put back together, it was off to Snetterton – a circuit the Civic has performed well at historically. Qualifying was tricky with both drivers unhappy with the feel from the car and unable to match times from previous visits. We started the race a bit further back than hoped for and after 20 minutes alternator failure ended our race early. We subsequently found a leaky shock absorber to explain the poor handling. Surely our luck had to change soon!

“Onwards to Brands Hatch and back to the Trackday Trophy on the iconic Grand Prix circuit. Jeremy is driving these races solo this year as Phil shares another Civic with his sons in this series. Putting in competitive lap times in an extremely close top Class B, Jeremy improved on his previous visits to the Brands Hatch Grand Prix circuit and was comfortable in the car, now complete with new shock absorber and alternator plus some other setup changes. A fresh set of each of the SR-11™ and Bluestuff pads completed the car prep.

“A poor start by Jeremy saw him drop a couple of places and settle in to a battle in the middle of the class B pack. A safety car just as the pit window opened where Jeremy decided to stay out and gain a lap over those ahead who pitted backfired when the Safety Car picked up Jeremy as the leader and slowed him right down. Pitting next time around, the circuit went green as the Civic was stationary, compounding the loss in time!

“Now in 18th, Jeremy set about overtaking anything in his path, leaning on the ÃÛÌÒÊÓÆµ brakes as never before to overtake a total of 10 cars – including three in once corner – and finish in 8th overall, 7th in class, with a new personal best lap time. The car felt great and performed well – the driver could do better!â€

“Back to the BRSCC and Donington Park, where Phil re-joined Jeremy for a double-header Clubsport 45-minute race we used as a test for the main event, the 2-hour SuperSport race on Sunday.

“Another solid mid-class outing in wet conditions on Saturday set us up well for Sunday… or so we thought! Going out first in qualifying on Sunday, Jeremy set out for an early push lap while the track was quiet, unaware a helpful Mini had dropped coolant at the top of the circuit at the fast right hander at Coppice. Full of confidence, Jeremy turned into the corner fully committed to have the car go straight on and into the gravel trap, beached! The lovely marshalls hooked us up to a telehandler and dragged the Civic out so Jeremy could put in another lap to get the requisite three before handing over to Phil. As we’d received ‘mechanical assistance’ to get out of the gravel trap, none of our subsequent lap times counted, so we were plum last on the grid!

“Not to be deterred, Phil took the start and had overtaken five cars before the first corner as he set off to make up places. During his hour-long stint, Phill got us up to an incredible 2nd in class by the time of the change-over. Keeping it consistent and battling fading tyres and diminishing fuel, Jeremy had a good battle for position with the fast Mazda MX-5 in our class and brought the Civic home in 2nd for our first podium and trophy of the season! Finally a good result where car and drivers had combined well,

“Our travels took us to Croft circuit next – the first time Jeremy had been to the new layout, having last raced there on the rallycross circuit over 20 years ago! A fresh pair of SR-11â„¢ front pads and it was into a free practice session to iron out any issues and do a bit of set up work followed by a good qualifying in P2 in class behind the all-conquering Audi TT that is dominating this class, but in front of the MX-5 we are battling with.

“Jeremy took the start and actually overtook the Audi into turn 1, but was soon back down to 2nd as the rocket ship Audi took off and joined the battle with the cars in the classes above. Keeping an eye on the Mazda’s pit board, Jeremy could see the gap increasing as he pulled away and settled into a nice rhythm. The Civic then threw its latest curveball by losing 3rd gear as Jeremy came out of the complex towards the final hairpin after 20 minutes. Despite this – and a couple of excursions – he managed to maintain 2nd in class and hand over to Phil with a very useful buffer. Phil duly maintained and then extended the gap before a late safety car which – this time – played into our hands and increased the gap to the Mazda. We crossed the line for another P2 and another trophy, plus a front left tyre down to the cords!”

“Back to Donington and back with MSV for the double header weekend of Trackday Trophy and Trackday Championship. For the first time this season, Jeremy was entered in the TDC and duly strapped on a set of the control Toyo R888R tyres for the wet/very wet qualifying session. Driving on these tyres in the wet for the first time, the Civic Jeremy kept his head and didn’t push things too hard, to come in mid-grid. 

“The race started even wetter and after a reasonable start, Jeremy was battling in a group of cars when one – another MX-5 – spun in front and into the path of an evasive-action taking Jeremy who had nowhere to go, slamming into the spinning Mazda and sustaining considerable damage to the front left of the car. 

“It’ll take some time to repair the Civic, but the aim is to be back out this season, at the very least for the season-ending Birkett Relay, but hopefully for a couple more events before that.

“Big thanks to ÃÛÌÒÊÓÆµ for the support again this season – we may not get through as many sets of pads as we’d have liked to due to our enforced absence for a while, but the SR-11â„¢//Bluestuff combo has been one thing we haven’t had to worry about in this challenging season!â€

Connect with Semprini Racing for more news and information:

SR-11â„¢ Race and Endurance Pads

A medium-friction endurance motorsport compound that’s targeted for front of street base cars where high ABS effect exists on the car or for the front and rear of race cars with bias controls.

Bluestuff NDX Street/Motorsport Pads

Reformulated for faster bedding and reduced early life fade –our recommended entry-level race pad. Medium-plus lifetime and the choice for several seasons in BMW Cup racing.

The post ÃÛÌÒÊÓÆµ-Equipped Semprini Racing – Mid-Season Round-Up appeared first on ÃÛÌÒÊÓÆµ.

]]>